Input
Material, state, source, expected variability and shutoff.
Layout · Editorial tool · Verified August 15, 2026
Sandustry Processing Plant Checklist
Turn verified mechanics into an inspectable plant. This is a planning checklist, not an official optimal blueprint.
Quick answer
What to do
For every stage, record input state, reaction or processor, every output, storage, overflow and manual access. Keep Water and fire reactions outside sorting components, and commission with a small known batch.
Processing plant planner
Reaction
Water contact, ignition or impact condition with containment.
Processor
Shaker, Filter or Press with clear working space.
Outputs
One route for each product, byproduct and loss branch.
Storage
Collector or material buffer with visible capacity.
Recovery
Overflow, stop control and safe manual access.
Apply it to the early Gold chain
| Stage | Must stay visible |
|---|---|
| Wet Sand | Water boundary and product outlet |
| Shaker | Gold below, Residue above, no trapped foreign solid |
| Burn zone | Residue input, surviving Burnt Residue, fire containment |
| Kinetic Press | 25-block fall, clear top, Gold and Seed below |
| Sorting | Filter continuation and vertical outlet |
Commission before scaling
- Mark the expected state at every boundary.
- Feed a small known batch.
- Trace every output, including loss and byproducts.
- Fill one downstream buffer deliberately and observe backpressure.
- Confirm you can stop and clear the line without dismantling the plant.
Use this as a build review
- Every input has a shutoff.
- Every reaction is contained.
- Every processor has working clearance.
- Every output has storage or overflow.
- Every Filter has two open routes.
- The Press has measured height and a clear top.
- Gold reaches Collector blocks.
- A player can reach likely jam points.